Public Addressing System
TOA
RM-200M Remote Microphone connects to the VM-3240VA, VM-3360VA, VM-2120 and VM-2240 for the purpose of making emergency (*3)/general broadcast announcements.
TT-104B is a program timer that comes with 4 outputs and controls 4 different broadcasts. With use of an optional rack-mounting bracket, it can be mounted in an EIA Standard equipment (occupying 1 unit size).
EV-200M is a playback-only Voice Announcing board to play back the messages recorded on The EV-350R. The EV-200M is designed to be built in the VM-2000 series amplifiers and VX-2000 system.
TOA Speaker Selector SS-2010 is a 10 zone BGM and 10 zone paging speaker selector. This highly efficient speaker selector can be installed with public address system in schools, malls, offices and places that requires the selection of speakers.
FV-200PS Switching DC Power Supply Panel supplies 24V DC power to each component of FV-200 Series Voice Evacuation System. In additional, the DC power supply shall connect to an emergency power supply for uninterrupted DC power during AC power failure.
FV-200RF Microphone Receiver Panel is used to connect the RM-200M Remote Microphone to the FV-200 Series Emergency Public Address System. Up to 4 RM-200M can be connected.
FV-200PP Pre-Amplifier Mixer Panel is the basic operation section of the FV-200 Series Emergency Public Address System
Z-FV200EV-AS Emergency Message Panel is the emergency broadcast operating section of the Z-FV200 Series Emergency Public Address System. It need not be installed when the system is used solely for general broadcasting purpose. It has facilities to manually start and reset emergency broadcasts. Emergency announcements are recorded in Indonesian (default settings), which can be changed by USB data transfer operations from rear panel.
The A-2060 is a high cost-performance mixer power amplifier suited for broadcasting paging or background music in schools, offices, shops, factories, mosques, churches and large rooms.
The AT-063AP is a flush-mounted wall attenuator and uses a transformer which allows connection of a wide range of loads (6 W or less). Volume can be adjusted in five steps. The AT-063AP features push-in terminal block for easy connection.
EV-20R is a convenient addition to sites where the same message or music is repeatedly broadcast. Up to 4 types of music and messages (6 minutes total time) can be recorded and played back. The USB port facilitates recording by transferring the supplied sound sources from a PC to the unit. The unit's small built-in amplifier enables small-scale broadcasts through a simple speaker connection.
EV-700 is a digital announcing machine capable of recording/playback. It is ideal for periodical,attention calling, and guide broadcasts uses in commercial and public facilities. Using the Setting Software makes it easy to perform sound source rewriting, settings, and controls. Preset sound sources like chime sound and Westminster chime are stored on the supplied memory card. The EV-700 can be mounted in an EIA-Standard equipment rack with the optional rack mounting bracket (1U size).
TU-652M is a highly intelligible driver unit suited to public address announcement applications. The driver unit is used in combination with a suitable horn (optional). Powder-coated finish and stainless steel screws ensure the unit's weatherproof capability.
SC-615M is a compact, highly intelligible speaker suited to public address announcement applications. Its external speaker component finished with powder coating, and stainless steel bracket and screws ensure the unit's weatherproof capability.
TH-650 is a speaker horn to be used in combination with an optional driver unit. Its powder-coated finish, and stainless steel screws ensure the unit's weatherproof capability.
PC-2268 is a surface-mount speaker with rated input of 6 W (100 V line application) designed for ceiling surface or wall surface installations. With the additional use of an electrical box, it can be installed to the location where no wall or ceiling is available for mounting. Compact and attractive design to blend in with interior spaces. The push-in type input terminal provides an easy cable connection and allows bridge wiring. The input power change can be made easily by changing the tap position of the transformer. Rear-closed structure with a rear cover keeps performance and sound quality constant regardless of installation location.
Integrated with a resin panel and speaker frame, the PC-658R is the ceiling mount speaker with a metal attached. It features spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer.
Integrated with a resin panel and speaker frame, the PC-648R is the ceiling mount speaker with a metal attached. It features spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer.
Integrated with a speaker unit and panel, the PC-2369 Ceiling Mount Speaker is of all metallic construction and ideal for use in a voice alarm system. It feature spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer. The push-in type input terminal block makes cable connections easy and allows bridge wiring.
Integrated with a speaker unit and panel, the PC-1869 Ceiling Mount Speaker is of all metallic construction and ideal for use in a voice alarm system. It features spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer. The push-in type input terminal block makes cable connections easy and allows bridge wiring.
Equipped with 6 Microphone inputs and 5 AUX inputs (simultaneous use of 9 inputs possible), the A-1706 PA amplifier of 60 W is designed to suit the following PA system applications: announcements, BGM, and broadcasting in mosques, churches, large rooms, and factories.
A-5012 is a half-rack 1-unit size 120 W desktop mixer power amplifier. Inputs 1 and 2 can be set for either MIC or LINE sound sources, and its output is compatible with both high-impedance (100 V and 70 V lines) and low-impedance (4 Ω) speaker connections. Functions can be set with a PC using the dedicated setting software. The A-5012 is ideal for use asa power amplifier in small commercial facilities and conference rooms.With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard equipmentrack (1 unit size).
A-5006 is a half-rack 1-unit size 60 W desktop mixer power amplifier. Inputs 1 and 2 can be set for either MIC or LINE sound sources, and its output is compatible with both high-impedance (100 V and 70 V lines) and low-impedance (4 Ω) speaker connections.Functions can be set with a PC using the dedicated setting software. The A-5006 is ideal for use asa power amplifier in small commercial facilities and conference rooms. With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard equipmentrack (1 unit size).
Remote Controller exclusively designed for use in conjunction with the MX-6224D permits ON/OFF control of speaker zones and sound effect function.
Digital mixer amplifier 2×240W, is designed for 2 zones Public address system that suitable for middle sized mosques application.
ITC
ITC MIXER AMPLIFIER STANDARD SERIES (PHONE JACK MIC INPUT)
- 60W RMS Mixer Amplifier, 3 mic, 2 aux, 100V/70V and 4ohms
- 120W RMS Mixer Amplifier, 3 mic, 2 aux, 100V/70V and 4ohms
- 240W RMS Mixer Amplifier, 3 mic, 2 aux, 100V/70V and 4ohms
- 350W RMS Mixer Amplifier, 3 mic, 2 aux, 100V/70V and 4ohms
- 500W RMS Mixer Amplifier, 3 mic, 2 aux, 100V/70V and 4ohms
- 650W RMS Mixer Amplifier, 3 mic, 2 aux, 100V/70V and 4ohms
ITC USB MIXER AMPLIFIER STANDARD SERIES (PHONE JACK MIC INPUT)
- USB Mixer Amplifier 60W, 100V/70V/4ohms, 3 mic & 2 aux inputs
- USB Mixer Amplifier 120W, 100V/70V/4ohms, 3 mic & 2 aux inputs
- USB Mixer Amplifier 240W, 100V/70V/4ohms, 3 mic & 2 aux inputs
ITC 5 ZONE MIXER AMPLIFIER STANDARD SERIES (PHONE JACK MIC INPUT)
- RMS 60W 5 Zone Mixer Amplifier, 3mic, 2 aux, 100V/70V/4ohms
- RMS 120W 5 Zone Mixer Amplifier, 3mic, 2 aux, 100V/70V/4ohms
- RMS 240W 5 Zone Mixer Amplifier, 3mic, 2 aux, 100V/70V/4ohms
- RMS 350W 5 Zone Mixer Amplifier, 3mic, 2 aux, 100V/70V/4ohms
- RMS 500W 5 Zone Mixer Amplifier, 3mic, 2 aux, 100V/70V/4ohms
- RMS 650W 5 Zone Mixer Amplifier, 3mic, 2 aux, 100V/70V/4ohms
ITC 5 ZONE MIXER AMPLIFIER (BGM & PAGING)
- RMS 120W 5 Zone Mixer Amplifier, each zone with attenuator, 4 mic, 2 aux, 100V/70V/4ohms, AC 230V and DC 24V
- RMS 240W 5 Zone Mixer Amplifier, each zone with attenuator, 4 mic, 2 aux, 100V/70V/4ohms, AC 230V and DC 24V
- TI-350S RMS 350W 5 Zone Mixer Amplifier, each zone with attenuator, 4 mic, 2 aux, 100V/70V/4ohms, AC 230V and DC 24V
- RMS 500W 5 Zone Mixer Amplifier, each zone with attenuator, 4 mic, 2 aux, 100V/70V/4ohms, AC 230V and DC 24V
- 5 Zone Paging Console with TI-120S/TI-240S/TI-350S
DSPPA
● Mini Digital Mixer Amplifier with USB & Bluetooth
● Built-in radio, Bluetooth, usb function.
● 2 MIC inputs, 2 EMC inputs, 2 line inputs, 1 line output.
● Speaker output of 100V or 70V & 4 -16 Ω.
● Support infrared remote control.
● With priority function, priority is EMC/MIC1>AUX1/AUX2/MIC2.
● With master volume control, individual volume control of MIC & Line, treble and bass volume control.
6 zones Integrated Mixer Amplifier
● 6 zones output, each zone with individual volume control
● 4 remote paging stations, support cascaded linkage
● 4 combo Mic inputs, support phantom power supply
● 2 AUX line inputs, 1 EMC input, 1 chime trigger input
● Each AUX and Mic input with volume and Bass & Treble control
● Support USB/Bluetooth for audio input
● Support TEL input, built-in one touch emergency alarm
● 70V/100V & 4-16 Ω flexible speaker output
● 6 Zones Integrated Mixer Amplifier
● 6 zones output, each zone with individual volume control
● 4 remote paging stations, support cascaded linkage
● 4 combo Mic inputs, support phantom power supply
● 2 AUX line inputs, 1 EMC input, 1 chime trigger input
● Each AUX and Mic input with volume and Bass & Treble control
● Support USB/Bluetooth for audio input
● Support TEL input, built-in one touch emergency alarm
● 70V/100V & 4-16 Ω flexible speaker output
● 6 Zones Integrated Mixer Amplifier6 zones speaker output
● 6 zones output, each zone with individual volume control
● 4 remote paging stations, support cascaded linkage
● 4 combo Mic inputs, support phantom power supply
● 2 AUX line inputs, 1 EMC input, 1 chime trigger input
● Each AUX and Mic input with volume and Bass & Treble control
● Support USB/Bluetooth for audio input
● Support TEL input, built-in one touch emergency alarm
● 70V/100V & 4-16 Ω flexible speaker output
● 6 Zones Paging and Music Mixer Amplifier with USB & Tuner
● 100V & 4-16 Ω, rated power 250W
● Support USB / SD / FM radio, with built-in chime
● 4 MIC inputs, Mic 1 with priority and muting function
● 3 AUX line input & 1 AUX line output for power extension
● Each AUX & Mic input with individual volume
● 60W 6 Zones USB/SD/FM Mixer Amplifier
● Built-in MP3/Tuner/USB/SD card inputs
● 6 zones output with pre-amplifier, 6 channels @ 100V outputs
● 3 LINE& 2 MIC inputs with individual volume control
● Mute function, easy to insert priority broadcast
● Each zone with independent switch; bass and treble controlled
● With level indicators and 5-unit LED display
● Output short-circuit protection
2U Mixer Amplifier
● Integrate MP3 player, FM tuner, Bluetooth, 6-zone selector, preamplifier and power amplifier.
● Control MP3/TUNER/Bluetooth with the remote controller, which includes mode switching, program selection, volume adjustment, repeat mode, and EQ mode.
● LED display can indicate volume, host status, program number, etc.
● 2 MIC inputs，3 AUX inputs, and 1 AUX output for public address.
● 4-16 Ω rated output.
● 120W 6 Zones USB/SD/FM Mixer Amplifier
● Built-in MP3/Tuner/USB/SD card inputs
● 6 zones output with pre-amplifier, 6 channels @ 100V outputs
● 3 LINE& 2 MIC inputs with individual volume control
● Mute function, easy to insert priority broadcast
● Each zone with independent switch; bass and treble controlled
● With level indicators and 5-unit LED display
● Output short-circuit protection
Mini Digital Mixer Amplifier with USB & Bluetooth
● Built-in radio, Bluetooth, usb function.
● 2 MIC inputs, 2 EMC inputs, 2 line inputs, 1 line output.
● Speaker output of 100V or 70V & 4 -16 Ω.
● Support infrared remote control.
● With priority function, priority is EMC/MIC1>AUX1/AUX2/MIC2.
● With master volume control, individual volume control of MIC & Line, treble and bass volume control.
Multi-channel Media Player with CD/USB/FM/Bluetooth 1U
● Supports CD/USB/SD card
● Imported digital movement is adopted, system +ESS decoding scheme and super error correction function
● Microcomputer control with light touch button
● Supports FM/AM digital radio
● Stereo radio L/R output
● Stereo CD/MP3 L/R output
● Stereo bluetooth L/R output
● Mixed audio output
● FM/AM radio can store 40 stations respectively
8 Zones Mini Remote-Control Panel
● Individual partition source selection
● Individual partition volume control
● Network port balanced audio output
● Digital screen display for audio sorce and volume
● DC 24V power supply
8 Zones Remote Paging Microphone
● Support 8 zones
● Clear signal level indication
● Built-in 2 kinds of chime signal
● Adjustable volume of MIC and chime
● Adopts D626 goose-neck microphone
● Adopts RJ45 interface for MIC connection, support the cascade linkage
8x8 Digital Audio Matrix PA System
● 7” touch screen, built-in control software, integrated with audio matrix, zones, timing, voice alarm, etc.
● 8 channel balanced audio inputs, 8 channel balanced audio outputs, each channel with individual EQ control
● Each zone support remote panel control, including audio selection, audio input and volume control
● Support 4 remote paging microphone, 2 local Mic with phantom power supply
● Support MP3 playing (built-in audio or external USB), FM. Built-in 4G memory sticker, can extend to 32G
30W Wall Mount Speaker with Power Tap
● Input 70V/100V/8Ω
● Wide Freq.Resp.:80Hz-20KHz
● Max SPL:105±2dB
● High sensitivity:90±2dB
● Wall mount type loudspeaker
● Metal grille and ABS enclosure of black color
● Equipped with hanging holes for mounting convenient
● Wall Mount Speaker
● Sounds clear and sonorousness;
● Top wire adopts integrated design, elegant clever and beautiful;
● Enclosure made of high quality fiberboard and birch cold-press leather manufacturing,
● eliminate resonant sound box, suitable for indoor;
● Input voltage 70V-100V, adapt different public broadcast line
70/100V Outdoor Waterproof Horn Speaker
● Waterproof, IPX6
● Suitable for outdoor use
● Built-in 100v/70v transformer
● Max SPL: 120±2dB
● Wide Freq. Resp.: 400Hz-8kHz
● High sensitivity: 105±2dB
● Equipped with brackets for installation
● 6W Wall Mount Speaker
●Rated Power:6W, built-in 100v/70v transformer
● 4.5”full frequency speaker with 14 core KSV material
● E-type pure copper wire transformer to ensure high fidelity
● Frequency Response:180Hz-15kHz; Max SPL:100±2dB; Sensitivity:90±2dB
● Unique fashion housing with streamlined appearance
● ABS environmental-friendly material, safe and durable
● 1.5W-10W ABS Wall Mount Speaker
● 70/100V, 1.5-10W with multiple terminals
● Max SPL: 100±2dB
● High sensitivity: 92±2dB
● Effective Freq:160Hz-18kHz
● Made of high quality engineering plastic
Professional Dynamic Microphone
● With full anti-interference
● Anti - electromagnetic interference and anti-mobile phone interference
● With switch impact eliminated
● Some special technology is applied for eliminating noise when switching on/off the microphone.
● Support battery/ phantom power supply switched automatically (only for CM30)
● Two power supply mode for CM30, convenient for application.
4*250W 4 Channels Digital Amplifier
● Multiple channels in 19” standard rack
● 70V/100V power output optional
● Full digital with 4*250W high efficiency
● With priority input function and 100V input available
● 1 U slim design, space and cost saving
● With standby function for power saving
4*125W 4 Channels Digital Amplifier
● Multiple channels in 19” standard rack
● 70V/100V power output optional
● Full digital with 4*125W high efficiency
● With priority input function and 100V input available
● 1 U slim design, space and cost saving
● With standby function for power saving
125W-500W 2 Channels Class-D Digital Power Amplifier
● High efficiency (85%) and with standby function for power saving
● 2 channel amplifiers within one 1U & 19" case
● With 2 audio inputs and 2 channel speaker inputs
● With 2 priority inputs and 2 100V inputs (distant input)
● 70V/100V speaker output for long distance transfer
● Industrial design for audio project, long term & stable use
● 20 cores magnetic steel, ensure high quality sound effect
● Super-strong reproduction of voice and music;
● Fashionable design of thin edge, plane, and big cylinder;
● Easy installation, suitable for ceiling in different thickness;
● UV-level highly flame retarding;
● Frequency response 65Hz-20kHz, maximum SPL.103±2dB,High sensitivity 95±2dB, distortion<1.5%.